Material handling

Lift tables


XZ Series Lift Tables feature zero-height platforms that sit just 3/8 of an inch above the floor. This extreme low height allows loads to be rolled on or off with a hand pallet jack, making the tables ideal for facilities without a forklift, or for use in fork-free designated areas. Six standard models are available and can be furnished in 2,000-, 4,000- or 6,000-pound capacities with a 44-by-48-inch or 48-by-50-inch platform. Lifting and lowering is controlled by either a hand pendant or foot switch. Maximum platform height is 35 3/8 inches. The lifts are equipped with a 1-horsepower external power unit and operate on standard 115/1/60 electrical power. The front of the platform is equipped with a 6-inch-deep flexible strip that yields on contact to prevent toe injuries.

Presto ECOA

Product information is provided by manufacturers. This publication has not independently tested manufacturers' products and cannot assume responsibility for the validity of product claims.

Post a comment to this article

Safety+Health welcomes comments that promote respectful dialogue. Please stay on topic. Comments that contain personal attacks, profanity or abusive language – or those aggressively promoting products or services – will be removed. We reserve the right to determine which comments violate our comment policy. (Anonymous comments are welcome; merely skip the “name” field in the comment box. An email address is required but will not be included with your comment.)